澳门威尼斯人官网

  • 咨询热线
  • 400-118-9886
  • 18953261412
  • 工作时间:24小时

In recent years, the conveyor belt is widely used in all kinds of engineering construction, the conveyor belt has relatively economical, automation, can well adapt to the surrounding environment, improve the effective power.The main part of the conveying system is the conveyor belt, but the failure of the conveyor belt due to the rated failure can often occur.Qingdao xin ze large Angle conveyor belt company how small make up here from the point of view of an inspection maintenance maintenance so as to improve the service life of the belt conveyor system, analysis of causes and explore the solution to reduce production costs, increase revenue., composition and classification of conveyor belt conveyor belt is installed on the conveyor for carrying and conveying material belt, consists of three parts: one is the core: provide the tensile strength and absorb the impact of the conveying material, provide necessary longitudinal transverse stiffness.-耐高温输送带

The second is the core layer glue material: there is a high degree of bonding strength between the frame fabric and the steel wire rope, which makes the tape have a good integrity and possible flexure.3 it is to cover the surface of the tape: protect the skeleton, motivation and conveying material, abrasion and impact resistance materials, corrosion, heat resistance, acid and traction and control materials meet the effect of different materials in the delivery.

conveyor components for regular inspection and maintenance, the bearing point 尼龙输送带

1: bearing point is the damaged parts of the conveyor belt, belt speed, as well as to the conveyor belt to transport the material blocks of impact load running direction are the important factors that should be paid attention to, charging chute width should be large enough at the receiving end.

2. Cleaning: keep the roller and roller surface clean, and keep the rollers and buffer rollers clean when the tape is returned to run

3. Rollers: rollers rotate flexibly and remove adhesion on roller.澳门威尼斯人官网

4. Top and bottom rollers: to comply with the management of rollers and the rules of butter, repair or replace damaged rollers in time.

5. tensioning device, check the tensioning device can move, travel size, a slide guide frame, health oil regularly, at the same time check in tensioning device Settings prevent material into the flat.

6. Conveyor belt: check the conveyor belt regularly. If there are early damage to cover and wear of the conveyor belt, the problem should be eliminated in a timely manner.


返回
返回列表
XML 地图 | Sitemap 地图